RX4 Forum

ALEX,
Do You know if there is a BILSTEIN KIT for our RX4??
If so please drop link with the info of the PART NUMBERS........So I could order a set for mine....

I have also replaced the 4 coil springs and have lifted it by 5 cm!
and it looks great.........

look forward to getting some info from you......
i looked at www.reichard-motorsport.com
he says something but im not sure that its correct???


thanks


RX4

There is no official Kit from Bilstein for the RX4.
There's only a kit to lower the normal Scenic.

Is it possible to send me some pictures of your work at the shocks and
from the result? 5cm is great. How many cm is your ground clearance now?
I'll create a membersite for you in the gallery:-)

ALEX....
I have around 40 cm clearence! and it goes anywhere....
i will try to get some pics and upload them to you......
but cant yet to much rain out here and damn cold........

@ anywhere i could help let me know!

send me a link of where to upload the pic's.....

thanks,


RX4

@Alex

Da ich im Englisch-Unterricht oft krank war h?tte ich mal ne Frage

Wird hier ?ber Bodenfreiheit gesprochen

40cm w?re doch verdammt viel 8O

Gruss Stefan

STEFANS.....
Sorry m8 cant understand what youre saying about my 40 cm clearence?
maybe alex, can translate for me.......


RX4

@ Stefan ... ja ... es geht um die Bodenfreiheit und er schreibt, dass es
um die 40cm bei seinem RX4 sind. 8O

@RX4 ... yes, Stefan asked about your groundclearence. He can't believe ( I too ...)

GUYZ,
I WILL SEND YOU SOME PICS TODAY TO SEE WITH YOUR OWN EYEZ..............

STEFANS...AND ALEX,
HERE IS ONE PIC.....
I CANT SEND MORE BECAUSE THE FORUM WONT EXCEPT MORE THAN 256KB?!?!?!


RX4

Now your membersite is available ... please visit it over the following link :-)

http://scenic-rx4.de/rx4.php

i tryed to compare your pics with some "normal" RX4 pictures.
Looks a bit higher. But for my understanding... is the RX4 at the
pictures the status of your RX4 now or how old are these pictures.
Because it doesn't looks like 40cm ground clearence

I can't identify the tyres you use at your RX4. Please post the name and
size. The biggest tyres for the RX4 ( till now ) are mounted at the RX4 from
Uwe ( 235/60 R16 from Toyo named Transpath )

Can you also tell us something about the way to lift the RX4?
Because... that's the only way to mount really bigger tyres at the RX4 i think.

Greets,
Alex

ALEX.....
OK , I MEASUERD IT JUST NOW!
AND ITS EXCATLY 36 CM

@ YES, MY TYRES ARE YOKOHAMA GEOLADER II , AND YES!
THEY ARE 235-60-16!
YOU HAVE A GOOD EYE M8

AND LAST , WE HAVE A GOOD FREIND HERE WHO MAKE CUSTOM COIL SPRINGS FOR THE INDUSTY...AND I ASKED HIM A FAVOIR , I TOOK OFF ALL THE COIL SPRINGS AND HAD HIM MAKE ME A ONE OFF SET THAT WILL BE AROUND 2-3 INCHES TALLER, AND A WIDER COIL SPRING BY ABOUT 3 MM..TO MAKE IT STIFFER.......


RX4.......

ALEX...
NO I UNDERSTAND WHAT YOU MEAN ABOUT THE HEIGHT!!!
YES, THE PICURES WITH THE MUD ON THE RX4....ARE OLD!!!
AND THERE YOU CAN SEE THE DIFFERENCE IN HIEGHT!!
AND THE OTHER NEWER PICS, ARE THE ONES I TOOK YESTERDAY....WHICH SHOW THE HIEGHT !!
SO NOW I CAN CLEAR THAT UP.....


BTW....I JUST SAW THE PICS YOU UPLOADED OF MINE....!
THANKS,
RX4

It's tricky :-) Please put a second RX4 side by side to your RX4
than it's the easiest way to show the difference

I WILL DO THAT AND LET YOU GUYZ KNOW....




RX4